Erlang software tools...
Generic selectors
Exact matches only
Search in title
Search in content
Post Type Selectors

Low MOS due to HO

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • 19th February 2013 at 08:50 #68858
    VanG
    Guest

    Hi all,
    please give idea what can be the reason for low measured MOS after HO complete. Sometimes after HO the MOS is good but sometimes after HO the MOS is strongly decreased…
    Best regards,

    ..rrb

    21st February 2013 at 10:12 #68859
    VanG
    Guest

    Is there some idea about this?

    25th February 2013 at 15:11 #68860
    pix
    Guest

    hi vang

    “Sometimes after HO the MOS is good but sometimes after HO the MOS is strongly decreased…
    ”

    your problem is too vague, i cannot help…

    25th February 2013 at 17:24 #68861
    VanG
    Guest

    Hi Pix,
    OK, my problem is vague but what can be the reason for decreased MOS after HO and what is the relation between MOS and RxQual?

    >>rrb

  • Author
    Posts
Viewing 4 posts - 1 through 4 (of 4 total)
  • The forum ‘Telecom Design’ is closed to new topics and replies.