- This topic has 12 replies, 1 voice, and was last updated 17 years, 2 months ago by Scot.
23rd October 2003 at 08:49 #36736hoangktnvGuest
i have some question need ur help :
– how to see VLR capacity in Siemens D900 switch
– the relation betwween VLR capacity with CP load, traffic, trunk, c7 … in case i want to increase (expand)VLR ‘ capacity
thanks in advance25th October 2003 at 07:12 #36737amberish trivediGuest
u can get vlr capacity in ur report which is genrated form switch.we are calling it msc template.as ur vlr capacity will increase ur cp load may increase and traffic will also increas.
to expand u have to must do software upgradation which can be done by patching load which will be provided by siemens person.
if still doubt the ask without hesitation27th October 2003 at 02:10 #36738hoangktnvGuest
thanks for your kind.
i mean how to know the maximum vlr capacity ( maybe via command in MSC).
plz show me which commmand and which parameter to know maximum VLR capacity tin Siemens switch
thanks again4th November 2003 at 12:54 #36739eroxGuest
Using DISPDBSIZE command you can see all ODAGEN element and their percentage of use. VSD parametar points to VLR memory size.
Best regards!5th November 2003 at 01:55 #36740NguyenGuest
How about the command for MSC/VLR capacity in AXE-10 system?
Thanks6th November 2003 at 12:01 #36741ScotGuest
In AXE you have to check a block Size which is responsible for holding dynamic subscriber data.
The corresponding block is MTV.
There it will Show the Maximum/100 & Current/100
Scot7th November 2003 at 02:08 #36742hoangktnvGuest
thanks Erox for your kind,
i found in my ODAGEN with VSD=2000, its mean is 2000 X 100 = 200.000 subs max in VLR ? OK?
and i still dont know the meaning of another group besides VSD parametter (for ex., group ABB, ACB ….) althought i have found all D900 document.
my mail : email@example.com
Hoangktnv7th November 2003 at 08:51 #36743eroxGuest
Meaning of other groups in ODAGEN you can ask only from Siemens personal who is responsible for it. Unfortunatelly, I don’t have any information about other ODAGEN groups.
That for VSD group is right!
rgds25th November 2003 at 13:52 #36744facreGuest
version française de la documentation sur votre systémé siemens version D900 sr926th November 2003 at 07:06 #36745hoangktnvGuest
Plz say it into English
i dont know france…
thanks for your kinds26th November 2003 at 07:08 #36746hoangktnvGuest
yes, version of Siemens 900 is SR914th March 2004 at 18:15 #36747carlosGuest
in ericsson AXE, u can try MTVRP command. It will show all users y VLR. But it takes long time (hours) to show the printout.19th March 2004 at 17:50 #36748ScotGuest
I never seen such a command MTVRP in AXE For the last 6 Yrs ?