Erlang software tools...
Generic selectors
Exact matches only
Search in title
Search in content
Post Type Selectors

Correlation between SDCCH drop & PSR

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • 23rd August 2012 at 06:34 #68527
    Tarun
    Guest

    Is there any correlation between SDCCH drop & Paging Sucess Rate????
    Eg-1:
    SDCCH Drop: 0.8
    PSR: 91.5%
    Eg-2:
    SDCCH Drop: 0.4
    PSR: 95.5%
    System: Nokia

    24th August 2012 at 12:39 #68528
    SHELDON
    Guest

    Hi Tarun,

    I think there is a correlation between the two.

    An SDCCH drop can result in a paging failure if the SDCCH is being used for paging.

    However, the situation you’ve depicted may also be indicating a problem which affects both paging and SDCCH drop.

    For example, if there is a problem with your signalling routes, it will cause SDCCH drops and will also impact paging.

    24th August 2012 at 16:12 #68529
    Agha
    Guest

    Hi All,
    I think SDR will not impact on paging.you just confirm, where your paging process is completed from vendor doc.In Huawei/Eric,paging is successful when SD is allocated and paging response is sent to MSC.

  • Author
    Posts
Viewing 3 posts - 1 through 3 (of 3 total)
  • The forum ‘Telecom Design’ is closed to new topics and replies.