Push CS traffic to 1800(inner zone) This topic has 4 replies, 1 voice, and was last updated 11 years, 10 months ago by Agha. Viewing 5 posts - 1 through 5 (of 5 total) Author Posts 7th May 2012 at 08:28 #68198 DDGuest Is there a parameter on Huawei that I can use to Push the CS traffic from 900(Outer zone) to 1800(Inner Zone)? 7th May 2012 at 09:16 #68199 AghaGuest Yes, There is Parameters for give priority to 1800 for call setup and also from 900 to 1800, can u tell me the scenario? 11th May 2012 at 09:41 #68200 DDGuest I have a cell that is carrying more traffic on 900 than 1800.and as a result the site experiences high SD congestion because of lack of free TCH to convert.so if we can push more traffic to 1800 then tere will be more TCH to convert to SDCCH 11th May 2012 at 12:07 #68201 korgiGuest Is there any rules to arange tilt if the 900 and 1800 sites are colocated? As I heard it is better to put 3 more tilt to 900 cells. ( Assume 900 cell has 6 tilts and 1800 has 3) Thanks 14th May 2012 at 12:40 #68202 AghaGuest Hi DD, Sorry for late reply,plz sent me email. i will share u detailed description. E-mail::sykh84@gmail.com Author Posts Viewing 5 posts - 1 through 5 (of 5 total) The forum ‘Telecom Design’ is closed to new topics and replies.