Generic selectors
Exact matches only
Search in title
Search in content
Post Type Selectors

Ater

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • #67551
    Amit
    Guest

    Hi,

    How we can map E1 on Ater?
    or for 100erlang traffic how many ater e1 required?

    #67552
    mahfuz
    Guest

    hi,
    Erlang is used as a unit to measure the traffic load. Its main applications are to dimension a call center, and to dimension a

    telecommunication network such as a GSM or UMTS network, whatever it is, circuit switched or packet switched.

    In its basic definition, the traffic load in Erlang is the total amount of resources used over a period of time. In a telecommunication

    network, 1 Erlang actually represents the occupation of one resource (one radio traffic channel in the case of a radio network) during one

    hour.

    If applied in a simple mathematical formula, it becomes :

    Traffic load(Erl)=Resources occupied X Time(h).
    as one Ater= 120 traffic channel so u have to map e1 for 100Erl on basis traffic load.

Viewing 2 posts - 1 through 2 (of 2 total)
  • The forum ‘Telecom Design’ is closed to new topics and replies.