Generic selectors
Exact matches only
Search in title
Search in content
Post Type Selectors

BTDM & GTDM & T3212

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • #67515
    Jason
    Guest

    I will be making the following changes to my Ericcson system and I am not sure where I would see the changes reflected in my stats.
    BTDM from BLANK to 1200 (20 hours)
    GTDM from BLANK to 255 (4.25 hours)

    This will set for a week to see the effects then:
    T3212 from 10 to 40 (4 hours)

    I need to know what stats I can look at to see a reflection in these changes.
    Also what would be acceptable ranges for these stats?
    Thanks,
    Jason

    #67516
    SHELDON
    Guest

    Hi Jason,

    BTDM and GTDM: Check paging performance

    T3212: Check paging and location update performance.

    Also check your SDCCH congestion and drop rates.

    “Acceptable” paging success rate is >90%. For location update, a success rate of >95% is good.

    Regards,
    SHELDON

    #67517
    Jason
    Guest

    Hi Sheldon;
    Thank you for the information. I will be monitoring those stats as I make my modifications. It seems that our stats might need some help to reach those goals.
    Jason

Viewing 3 posts - 1 through 3 (of 3 total)
  • The forum ‘Telecom Design’ is closed to new topics and replies.