Generic selectors
Exact matches only
Search in title
Search in content
Post Type Selectors

TRX IDLE

Viewing 10 posts - 1 through 10 (of 10 total)
  • Author
    Posts
  • #67213
    Pet
    Guest

    hi
    I’ve a problem..I’ve a cell(RBS2216) with 2 TRX.. and the second TRX is always idle.. I tried to do a swap .. and still the second TRX idle. what can I do?

    #67214
    Jason
    Guest

    If you have swapped the hardware, I would think this would be a parm issue.

    #67215
    Pet
    Guest

    thank u very much Jonson for the reply, what are probably the parameters I shuld check?
    THX

    #67216
    NJ
    Guest

    Hi,
    Try to lock the one TRX working, BCCH should jump to the other and see if there is traffic.
    please send printout RXCDP, RLCRP

    BR,

    NJ

    #67217
    Pet
    Guest

    THX NJ
    I tried the idea of locking the 2nd TRX, the traffic tends to zero… is that mean the TRX is faulty?

    #67218
    pix
    Guest

    pet,

    yes, probably the trx. there is a remote chance that it is the bts itself or the digital module that is faulty, but i’d rather bet on the trx.

    rgds
    pix

    #67219
    Pet
    Guest

    Thx Pix
    I sent a request to change the TRX …But what did u mean by digital module?

    #67220
    pix
    Guest

    PET,

    I don’t know the name in E/// BTS. It’s the module that interfaces the BTS with the Abis, called SUM in ALU.

    rgds,
    pix

    #67221
    Pet
    Guest

    Pix
    In E/// the module that interfaces the BTS with the Abis is called DXU “Distribution Switch Unit”
    BR/

    #67222
    pix
    Guest

    cool, thanks 😉

Viewing 10 posts - 1 through 10 (of 10 total)
  • The forum ‘Telecom Design’ is closed to new topics and replies.