Generic selectors
Exact matches only
Search in title
Search in content
Post Type Selectors

Paging Deletion Increased

Viewing 7 posts - 1 through 7 (of 7 total)
  • Author
    Posts
  • #67172
    agz
    Guest

    Hi ALL,
    Lately paging deletions has increased in the network..All cells are on Non-combined configuration with 4 multiframes between paging..
    Wt all shud I chk??

    #67173
    pix
    Guest

    hi,

    the first thing to check is your PCH load on the Air interface (or the ratio “paging messages” / “paging capacity”). If there is congestion on the pch, then one of the solutions is to reduce the LAC size.

    Best Regards,
    pix

    #67174
    Xlex
    Guest

    Sorry, but If we always we reduce the LAC size once we face a paging deletion problem…! we find in the network just the small LACs… is there anther way to troubleshoot the paging PB without reducing LAC size ?
    THX

    #67175
    pix
    Guest

    hi xlex,

    I love your sarcasm
    (that’s sarcasm too)

    if PCH is congested, then ONE of the solution is to reduce the LAC size.

    1/ not all paging deletion are linked to PCH congestion

    2/ IF the PCH is congested, then there are others way to solve the problem.

    in your case : LAC are already small, and PCH may not be congested.

    So in your case, you are still in step 1 : what is the cause of the deletion ? t3113 expiry ? wrong LAC address ? wrong MSC parameters ? SDCCH drops ? Abis congestion ? PCH congestion ?

    Best regards,
    pix

    #67176
    Vijay
    Guest

    How SDCCH Drop cause of page deletion ?

    #67177
    Optim
    Guest

    I’m sure Pix wanted to write SDCCH Congestion as this affects Paging performance.

    Thanks,

    #67178
    Vijay
    Guest

    Thanks Optim,

    how SDCCH Congestion cause page delete ?

Viewing 7 posts - 1 through 7 (of 7 total)
  • The forum ‘Telecom Design’ is closed to new topics and replies.