Generic selectors
Exact matches only
Search in title
Search in content
Post Type Selectors

Half rate drop is high!!!

Viewing 5 posts - 1 through 5 (of 5 total)
  • Author
    Posts
  • #67080
    Cyrus
    Guest

    Hi,
    In my network. I observed that some cells with high call drop are due to the high drop on Half rate. Some cells with configuration 4-4-4 and traffic 17,16,18 er lang in each sectors are high on half rate drop.In some cells Half rate threshold is 40% and 50%.
    Please suggest what to do this regards so that half rate drop can be minimized.

    Please help! Vendor-ZTE.

    #67081
    Cyrus
    Guest

    Please help!

    #67082
    Cyrus
    Guest

    Hi Pix,
    Please help.

    #67083
    VanG
    Guest

    Is this dropped cells are dualband or not? If yes, try to configure halfrate for the both bands…

    #67084
    Cyrus
    Guest

    Thanks Veng,
    The cells are in single band with 4-4-4 configuration.

Viewing 5 posts - 1 through 5 (of 5 total)
  • The forum ‘Telecom Design’ is closed to new topics and replies.