Generic selectors
Exact matches only
Search in title
Search in content
Post Type Selectors

High SDCCH drop an low CSSR

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • #36394
    khalil
    Guest

    Hi
    I have a problem of low call setup success rate and high SDCCH drop, when i see the counters i don’t find any problems of interferences or bad quality (UL and DL). the cells have a good HO_Better cell and low TCH drop!!!

    #36395
    hatreel
    Guest

    about sdcch drop high problem:my advice that this site serving very far area(overshoot problem) so sdcch drop rate high if not you can check for this site tru antena cable etc..and you can take a drive test for this site serving area etc
    thanks

    #36396
    pix
    Guest

    khalil,

    a call is done on a TCH that belongs to a TRX that is different than the TRX with the SDCCH.

    So you might have a problem on one frequency, creating high SDCCH drop, but the users that manage to access a TCH are fine, because they fall on a TRX with good quality..

    you chsould check this 🙂

    regards,

    #36397
    Mehrdad
    Guest

    Hi Khalil,
    If you have problem with most of cells in your BSC i can help you. contact with me.
    mehr_sed@yahoo.com

Viewing 4 posts - 1 through 4 (of 4 total)
  • The forum ‘Telecom Design’ is closed to new topics and replies.