Generic selectors
Exact matches only
Search in title
Search in content
Post Type Selectors

number of EGPRS user

Viewing 7 posts - 1 through 7 (of 7 total)
  • Author
    Posts
  • #66982
    Mr GPRS
    Guest

    hi Data expert,

    is there any way to know number of EGPRS user per cell

    Ericsson vendor

    #66983
    pix
    Guest

    hi,

    it depends what you mean by “number of users” : number of active users, or number of users in standby ?

    if active users, then, you just need to see how many simultaneous TBF were allocated in one cell, at most, in only one direction (ie. in DL).

    if number of standby users, then, no. Users in standby mode are not visible by the system at the cell level.

    regards
    pix

    #66984
    Mr GPRS
    Guest

    thanks Pix for quick replay

    would you mind to have your mail cuz most of the replay for data quations comes from you and i need your help

    thanks

    #66985
    pix
    Guest

    hi mr gprs,

    feel free to post any question you have… if we reach the stage where your need to send me documents, then we’ll use emails…

    regards
    pix

    #66986
    Mr GPRS
    Guest

    hi Pix,

    1. in ericsson there is a counter called

    ACTEUSE which is The accumulated number of active users with EGPRS capable mobiles. DTM is not included ,,, unit is user

    i check for one cell and the value i get is 164440! i dont think that those amount of user are there for that cells.

    2. is there is any relation between sharing factor ad number of user?

    3. how to calculate PDCH congestion in the cell!

    #66987
    SUNIL KAUKL
    Guest

    is there any way to know number of EGPRS user per cell , WE ARE USING HUAWEI BSC6000 AND HUAWEI BTS3900A, KINDLY REVERT

    #66988
    AliAsgher
    Guest

    Hi Mr GPRS,

    Divide ACTEUSE by the counter ACTEUSESCAN and then post the results.

Viewing 7 posts - 1 through 7 (of 7 total)
  • The forum ‘Telecom Design’ is closed to new topics and replies.