Generic selectors
Exact matches only
Search in title
Search in content
Post Type Selectors

2G-3G HO (ALcatel-Lucent both 2G and 3G)

Viewing 5 posts - 1 through 5 (of 5 total)
  • Author
    Posts
  • #66773
    Maxim
    Guest

    I am trying to activate on one site 2G-3G HO.

    On RNC and BSS side i think did almost all the necessary changes.

    However on BSS side I do not know were to fing and how to change
    FDD_REPORTING_THRESHOLD and FDD_REPORTING_OFFSED.

    Is there anything else that needs to be changed on the Core level? (Huawei)

    #66774
    Maxim
    Guest

    Problem solved.

    #66775
    pix
    Guest

    hi maxim,

    how did you solve it ?

    regards
    pix

    #66776
    Maxim
    Guest

    On the core network part things are the same as for 3G-2G HO, so no other changes are necessary.

    In our case, on a cell level parameter: EN_2G_3G_HO_NO_SERVICE_HO
    needed also to be put on 1.

    FDD_REPORTING_THRESHOLD and FDD_REPORTING_OFFSED can’t be modified in the B10 OMC but they are on 0 so do not influence the behaviour of the HO.

    #66777
    pix
    Guest

    maxim,
    thanks 😉

    pix

Viewing 5 posts - 1 through 5 (of 5 total)
  • The forum ‘Telecom Design’ is closed to new topics and replies.