Generic selectors
Exact matches only
Search in title
Search in content
Post Type Selectors

High TCH Drop due to Bad Quality Uplink

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • #66408
    wirahadi
    Guest

    Hello there…

    i have a problem in GSM900 system,one cell that i try to optimize have a problem with TCH drop Bad Quality uplink.

    in my opinion there is possibility external interference, and i try with change the BCCH.

    But there is no impact with change BCCH. Can any body help me to solve this problem.

    We use Ericsson system

    #66409
    pix
    Guest

    hi,

    have you tried changing the other frequencies ?
    if there is interference on bcch, the you would see bad call setup, sdcch drop, sdcch assignment failure and tch drop.
    if there is interference on non-bcch trx, then you’d see mostly tch drop, except if sdcch ts is also located on this trx. In which case you’d see call setup failures/sd drop/sd assign fail as well.

    #66410
    wirahadi
    Guest

    hi pix

    thank you for suggestion

Viewing 3 posts - 1 through 3 (of 3 total)
  • The forum ‘Telecom Design’ is closed to new topics and replies.