Generic selectors
Exact matches only
Search in title
Search in content
Post Type Selectors

Planning HSN in SFH 1*1

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • #66372
    Ian
    Guest

    Dear All,

    Having Hopping SFH 1*1, what is the impact of having contiguous HSN between 2 sites;

    For instance:

    Site1 (all 3 sectors) HSN=15
    Site2 (all 3 sectors) HSN=16

    If we set up other HSN for Site2, does it make a difference ?

    I would have said “No” as sites are not synchronised , does anybody have an idea on this ?

    I saw some theorical studies stating of different results with different HSN ?

    Thanks
    Ian

    #66373
    pix
    Guest

    Ian,

    HSN generates random sequences, and BTS neighbours are not sync, so you’re right : there is no influence.
    I’ve never seen any study about this though.

    regards
    pix

    #66374
    Ian
    Guest

    Hi Pix,

    Do you have good results is ALU B10 using SFH 1*1 ?

    BR
    Ian

    #66375
    pix
    Guest

    hi ian,

    yes, sure… it’s not dependent on the vendor though ! it should work well with alu, e///, nsn, huawei, etc.

    if your antenna design is good, and if your radio load is not too high, then sfh 1×1 can give results as good as bbh.

    regards
    pix

Viewing 4 posts - 1 through 4 (of 4 total)
  • The forum ‘Telecom Design’ is closed to new topics and replies.