Generic selectors
Exact matches only
Search in title
Search in content
Post Type Selectors

Drop on TS31 of some BSCs of ALU

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • #66303
    PG
    Guest

    Hi everyone,
    We met the problem like this. Many BSCs have BSS RTC drop, just on some TS 31 of the BSC (the problem is not all TS31 suffer from the drop). Before, customer lock these timeslots so that we do not monitor the drop. However, when the BSC or MSC perform some reset or something, the timeslot unlocked and the drop occur.
    As ALU document, the TS31 is from the AterTP 9 to 40, which is allowed to use for traffic. The MSC side confirm that the CICs are idle when I ask them to check. MSC is Huwei.
    Can anyone tell me why the drop happen and how to check if the problem is because of BSC or MSC side?

    #66304
    Rex
    Guest

    Hi,
    check with MSC again. They always say everything is OK with them, which is not true.
    Regards,
    Rex

    #66305
    pix
    Guest

    yes, it can only be a MSC problem… or perhaps a problem in TC ?

    regards
    pix

    #66306
    jamal
    Guest

    HI

    PLEASE CAN YOUR HELP ME TO MAKE CORECTION OF TE FOLOWING PROBLEME:

    IN ERICSSON BSS WE HAVE MAKE EXTENSION FOR SOME BTS SITE WITHH TRX BANDE 1800MHZ; AFTER THE EXTENTION WE SEE A DEGRADTION OF QOS ( TE,TC) after we have desactivated the 1800 TRX the situation is normalised.

    please your help

Viewing 4 posts - 1 through 4 (of 4 total)
  • The forum ‘Telecom Design’ is closed to new topics and replies.