I have some cells wich have high trafic in my ALU network.
So I dicided to install ANY combiner in order to add more than 4 TRXs on the sector_1, since the two sectors( 2&3) are not full in TRXs.
But the issue is : after the installation of ANY, the trafic decreased : it becomes 10Erl instead of 33erl.
Does some one can help me please ?
Hi JO,
in order to keep traffic as before, remove ANY and activate HalfRate. ANY gives additional attenuation. Therefore the coverage decreases, hence, traffic decrease.
Regards,
Rex
In addition of what Rex said after activating the HR and you still have congestion try moving some traffic to the neighbor cells.
If the cell is on a isolated area and the congestion still continues decreasing the HR threshold
Hi
Thank you for this; but I want to use ANY on the sector_1 because it has 40 Erl and the 2nd and 3rd sectors have each 5 Erl.
It is an Isolate cell.
Can you tell me more please ?
I think its better to remove any activate HR and set HR threshold to 40% but If you want to use ANY than
install a bigger antenna with TMA so you can gain some dB