Generic selectors
Exact matches only
Search in title
Search in content
Post Type Selectors

signal fluctuation

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • #66253
    vic
    Guest

    Hi
    we r using ZTE equipment and Cell is configured in 3+3+2.
    in first sector there is 3 TRX and the BCCH is in 1st TRX but zero dbm power in the BCCH TRX and 43 dbm power in 3rd trx. Is this the reason of signal fluctuation.

    #66254
    Tanuj
    Guest

    It can be that the BCCH TRX is faulty shift the BCCH and other TRX then check power, yes it can be the reason for signal fluctuation, check the trx for LAPD alarm

    #66255
    vic
    Guest

    hi tanuj,
    i have shifted the BCCH in 1st TRX, and power is also 43Dbm, but in dedicated mode, if call matured in 2nd and 3rd TRX( Hoping TRX)RX level varies continuously and RX quality is also Fluctuating from 0 to 7 continuously.

    #66256
    pix
    Guest

    hi,

    it’s probably a case of faulty combiner or of cross feeder.

    regards
    pix

Viewing 4 posts - 1 through 4 (of 4 total)
  • The forum ‘Telecom Design’ is closed to new topics and replies.