Generic selectors
Exact matches only
Search in title
Search in content
Post Type Selectors

2G Handover Basics

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • #66032
    New RF Engr
    Guest

    Hi,

    I have a basic question related to Handover in 2G.

    When there is a BCCH clash between nearby cells, why HSR becomes degraded (reversions increase is high) although handover only happens in busy mode during call when Traffic channels (TCH) are being used, then why due to BCCH clash, handover statistics becomes degraded?

    thanks,

    #66033
    pix
    Guest

    hi,

    the calls can be allocated on the BCCH frequency : the BCCH trx carries 1 BCCH timeslot, 1 SDCCH timeslot and 6 TCH timeslots.

    So those 6 calls will be interfered and might have problems to leave this cell.

    Incoming MS that are allocated on those TCH timeslots (due to HO) might not be able to connect to those timeslots and will revert to the old channel.

    Don’t forget that MS in dedicated mode in cell A is measuring the BCCH of the neighbours. If these bcch are interfered, they might not be able to collect relevant measurements. Therefore one MS might be sent to a neighbour, based on degraded measurements.

    regards
    pix

Viewing 2 posts - 1 through 2 (of 2 total)
  • The forum ‘Telecom Design’ is closed to new topics and replies.