Generic selectors
Exact matches only
Search in title
Search in content
Post Type Selectors

Low paging success rate in RNC

  • This topic has 1 reply, 1 voice, and was last updated 13 years ago by Bob.
Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • #65920
    PQ
    Guest

    HI!

    We are using ZTE equipment and we find that there is low paging success rate. In ZTE, is there any provision to find reasons for Paging failure? Thank you in advance

    #65921
    Bob
    Guest

    in this regard in MSS we can consider two issues:
    If you have totally low PSR I suggest you work on Timer 3212 in MSS (Implicit deattach)
    If the problem is limited to one or some area modify Paging method in MSS
    Here is one example , with changing paging method we obtained some improvement:

    LAI = xxxxxxxx
    Paging type = All paging types
    Priority = All priorities
    Paging times = 3
    First Paging duration = 6
    Second Paging duration = 6
    Third Paging duration = 6
    Fourth Paging duration = 4
    Fifth Paging duration = 4
    TMSI or IMSI = First Paging with TMSI
    = Second Paging with TMSI
    = Third Paging with IMSI
    = Fourth Paging with TMSI
    = Fifth Paging with TMSI
    All RAN paging = First Paging send to current LAI
    = Second Paging send to current LAI
    = Third Paging send to current LAI
    = Fourth Paging send to current LAI
    = Fifth Paging send to current LAI

Viewing 2 posts - 1 through 2 (of 2 total)
  • The forum ‘Telecom Design’ is closed to new topics and replies.