Generic selectors
Exact matches only
Search in title
Search in content
Post Type Selectors

SDCCH Congestion is more than 100 %

  • This topic has 2 replies, 1 voice, and was last updated 13 years ago by Bijoy.
Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • #65760
    HWEng
    Guest

    Hi guys,

    What can be the causes for the following situation:

    SDCCH Seizure Requests: 17

    Failed SDCCH Seizures due to Busy SDCCH: 23

    Failure is more than request. Vendor is Huawei, BSC6000. It happens in all cells of the site. So consequently

    Congestion Ratio on SDCCH per CELL (due to Busy) = 140 %, 170 %….

    No any alarm
    During drive test no any block call
    All frequencies were changed
    Software of BTS was updated
    Site was deleted and re-created in the BSC
    Site was restarted

    but…no any lucky result. SDCCH Congestion still is more than 100 %.

    Please your comments.

    #65761
    MRD
    Guest

    Hİ HWEng

    i have had this problem also on Huawei and i did the same things as you are but finally found out that for some cells counters are not working normally. Please check your counters

    #65762
    Bijoy
    Guest

    Hi
    Disable Directed retry/Immediate assignment on TCH/Dynamic SDCCH & check.

    Br\\
    Bijoy

Viewing 3 posts - 1 through 3 (of 3 total)
  • The forum ‘Telecom Design’ is closed to new topics and replies.