Generic selectors
Exact matches only
Search in title
Search in content
Post Type Selectors

Poor CSSR After BSC Software Upgrade

Viewing 5 posts - 1 through 5 (of 5 total)
  • Author
    Posts
  • #65713
    Alexia
    Guest

    Hi Engineers,
    We’re experience poor CSSR in some sites after BSC software upgrade. Strangely other sites within same BSC are OK. The issue is TCH Attempts increased and TCH assignment failure increased. SDCCH Assignment success is ok, the problem is on TCH Assignment, and it seems there’s a significant increase in incoming handovers and mostly they fail. HO Parameters and Neighbors are OK.No HW Alarms. What is this?

    #65714
    agp
    Guest

    Hi,

    Same situation in our network (NSN vendor) after upgrade new BSC software. There’re no main changes on the KPI several hour after upgrade. But, the Tch assignment success rate on the BSC was degraded after this activity …

    #65715
    Smart
    Guest

    Alexia I can see that your TCH Attempts increased so you have more load and eventually congestion.

    Check the number of E1 on those sites, maybe the upgrade has removed some.

    Incoming HO from where?

    #65716
    anh
    Guest

    Hi Alexia,

    TCH Attempts increased because subcribers cannot make call so they keep trying. Therefore TCH Attempts and TCH Assignment failure both increase.
    You can check if the TCH Assignment Preparation Fail due to BSS (HW) increase or not. If true, then some HWs or the BSC need resetting.

    Did you strictly follow the upgrade procedure? Which vendor?

    #65717
    Alexia
    Guest

    we resolved his issue. it was a mismatch between BSC OPC’s and MSC DPC’s. Atfer rectification the problem was cleared

Viewing 5 posts - 1 through 5 (of 5 total)
  • The forum ‘Telecom Design’ is closed to new topics and replies.