Generic selectors
Exact matches only
Search in title
Search in content
Post Type Selectors

TEST SYSTEM in AXE10

Viewing 15 posts - 16 through 30 (of 37 total)
  • Author
    Posts
  • #36179
    Johnson
    Guest

    Hi, all
    We know that in AXE10 we can use TEST SYSTEM command to do many thing.
    But who can tell me how to use the TEST SYSTEM command to forced the subscriber to do location updating or period location updating.

    Thanks

    #36180
    akg
    Guest

    hello everybody and rxcmoo,
    i’m new in axe10 as well as here.
    what’s test system?
    can u send me also infos and docs about test system? tnx.
    my email is ilikeyou5500@yahoo.com
    hello to agentorange, you’re working in the smart phils?

    #36181
    mustafa
    Guest

    hi!
    iam mustafa from Libya , work on axe10.. I really thank you for this great site .
    i need how to make adjustments , both ,by commands and manually to CLM …
    AND , how to know the record and list of the outgoing of certian subsicriber …
    thanks alot

    #36182
    crack2bit
    Guest

    hi!!! anyone here knows how to use the test system for send signal which a given CIC is greater than 255? thanks!!! =)

    #36183
    suchit
    Guest

    hi
    yes u can use command CTRAI:…., command for tracing a call. is there any command in test system to trace the messages or message flow in ERICSSON network. i need to visualise the messages/record the messages when it comes. kindly send me some documents on ERICSSON TEST SYSTEM.

    regards

    #36184
    senthil
    Guest

    hai,
    i work with axe10 switching
    system in rsu.what type of commands
    can be use in rsu.plz contact my
    e-mail grs_bsnl@yahoo.co.in.
    thankyou.

    #36185
    salsalisis
    Guest

    processus of sitel algeria

    #36186
    Dinesh Garg
    Guest

    Hi All,

    Is there any tool to decode CTRAI print.

    #36187
    geshi
    Guest

    Hi all
    i wan’t know if there is a trace to decode the BICC trace in Ericsson switch

    #36188
    suchit
    Guest

    for information about CTRAI printout , you can check the printout details in Alex. tell me if that helps u.

    #36189
    Paulo Leal
    Guest

    Hi, Sammer,

    use command syfri.

    #36190
    haythem
    Guest

    Hi,

    I have the same request as Nguyen. Could you please include me in the response.

    Thanks in advance,

    #36191
    bert
    Guest

    test system
    Is only for experts ,who are trained to use it .
    when misused it can destroy the whole switch with one command .

    #36192
    BINDU
    Guest

    HI I NEED
    BSC CALL TRACING COMMANDS
    can you send ME THANKS

    #36193
    Michael King – MSCEngineer
    Guest

    Where would you find the data to interpet software errors on the AXE-10 excluding the E-module in ALEX.

    command SYRIP:SURVEY,SYRIP:LOG and SYRIP:EVENT=XXX; is there anyhtinh else available ?

    Thank You

Viewing 15 posts - 16 through 30 (of 37 total)
  • The forum ‘Telecom Design’ is closed to new topics and replies.