Generic selectors
Exact matches only
Search in title
Search in content
Post Type Selectors

CI

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • #65316
    PIX
    Guest

    I give you again the result of the test performed on site this morning with our BSC/BTS power-off:

    332 “Prepare Handover” message received from MSC19 where as our radio signal is down
    – 293 “Prepare Handover” have LAC/CEL = 50400 / 47612 as target cel
    – 37 “Prepare Handover” have LAC/CEL = 50400 / 47615 as target cel
    – 2 “Prepare Handover” have LAC/CEL = 50400 / 47614 as target cel
    The source
    – 111 “Prepare Handover” is coming from MSC19 LAC/CEL = 50100 / 33333
    – 27 “Prepare Handover” is coming from MSC19 LAC/CEL = 50100 / 33345
    – 23 “Prepare Handover” is coming from MSC19 LAC/CEL = 50100 / 33342
    – 36 “Prepare Handover” is coming from MSC19 LAC/CEL = 50100 / 33336
    – 43 “Prepare Handover” is coming from MSC19 LAC/CEL = 50100 / 33335
    – 45 “Prepare Handover” is coming from MSC19 LAC/CEL = 50100 / 33332
    – 7 “Prepare Handover” is coming from MSC19 LAC/CEL= 50100 / 33313

    i have checked and there are no duplicate CIDs on our network

    #65317
    Pix
    Guest

    Hi “PIX”,

    I don’t understand your problem… please don’t use my nickname !

    cheers
    pix

Viewing 2 posts - 1 through 2 (of 2 total)
  • The forum ‘Telecom Design’ is closed to new topics and replies.