Generic selectors
Exact matches only
Search in title
Search in content
Post Type Selectors

Abnormal TBF drop on a cell(Ericsson)

  • This topic has 3 replies, 1 voice, and was last updated 13 years ago by saleh.
Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • #65311
    Arif
    Guest

    Hi All,

    Good day. I am facing a problem with one of my Ericsson cells. It’s an EDGE cell. Defined PDTCH 3, Though cell throughput is very low, around 10~20Kbps. TBF drop rate is also abnormal. 20~30%. CS KPI is very good. DT has been conducted but often speed drops. Analyzing the log file I cant find out nothing. (Nemo log). Can u please help me to overcome the issue. This issue has been raised from a corporate client. Which parameters or KPI can i check in this regard.

    Thanks in advance.

    Arif.

    #65312
    Arif
    Guest

    Hi Pix,

    Please suggest me to solve the issue.

    Thanks and BR.

    Arif.

    #65313
    pix
    Guest

    hi,

    if you don’t see anyting abnormal during drivetest, i would suspect a customer problem… could you check
    – dl tbf congestion ?
    – dl tbf throughput ? (not per cell, but per tbf)
    – anything related to DL gprs activity : llc volume ? tbf avg duration ? volume per DL TBF ?

    it might be that you have only very very little gprs traffic in that cell therefore you have statistically a lot of chance of seeing gprs signalling for MS with poor radio quality.

    also, what is the DL RLC retransmission rate ?

    regards
    pix

    #65314
    saleh
    Guest

    hi all,

    please any one can help me to find formullas for the below KPIs:

    1. TBF Drop
    2.(total DL TBF abnormal released/total DL TBF normal release)

Viewing 4 posts - 1 through 4 (of 4 total)
  • The forum ‘Telecom Design’ is closed to new topics and replies.