Generic selectors
Exact matches only
Search in title
Search in content
Post Type Selectors

why UL Qual degraded

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • #65309
    FH
    Guest

    if there is a co-bcch environment where two cells serving in same area with same BCCH, since BCCh is downlink then why the ul quality degraded. we know that ul and dl channel are spaced apart by 45mhz.
    anyone please answer this query.

    #65310
    pix
    Guest

    an ARFCN defines both an UL frequency and a DL frequency.
    If you assign ARFCN=1 for a BCCH, it means the TRX tx@935.2MHz and the MS tx@890.2MHz.

    So both DL and UL should be interfered. And the UL will be more interfered because the MS are spread over a large area, resulting in multiple sources of interferences for the receiving side (the BTS)
    On the other hand, in DL, the MS are usually more concentrated around their cell, and quite fare from the intereferer cell.

    regards
    pix

Viewing 2 posts - 1 through 2 (of 2 total)
  • The forum ‘Telecom Design’ is closed to new topics and replies.