Generic selectors
Exact matches only
Search in title
Search in content
Post Type Selectors

SMDR and serial connection

Viewing 5 posts - 1 through 5 (of 5 total)
  • Author
    Posts
  • 15th July 2003 at 10:29 #36127
    mr_angus
    Guest

    Well guys,

    Since posting here and other places I have gleaned alot of info. Two weeks ago I knew nothing about telecoms and PBX’s and now I am logging calls on my laptop.

    What I need now is pin configs for serial connection to SMDR in order that I can link to PBX’s to capture data output’s. My most urgent ones are the NEC IPS Lite and the Siemens Hicom 100e.

    If any of you have pin config info then please send it my way.

    Thanks!!

    17th July 2003 at 16:47 #36128
    Seth
    Guest

    Do not know actual pin outs. but you could figure it out with a breakout box in about 5 min

    18th July 2003 at 08:50 #36129
    mr_angus
    Guest

    That sounds interesting Seth.

    Sadly though I have never heard of a breakout box 🙂 Could you be kind enough to explain what it is where I can get one and how much it would cost.

    Thanks for your help!!

    18th July 2003 at 15:35 #36130
    Seminole
    Guest

    did a quick search on Yahoo for (“Breakout Box” AND SMDR) and found the following links. I believe the second one actually has a place to order a breakout box. But they have some tech info and the RS232 interface info..

    http://www.wti.com/tech/p3pbifac.htm

    http://www.sandman.com/rs232.html

    Not sure if this will help but if you Yahoo or Google for Breakout Boxes, you will find a ton of info.

    23rd July 2003 at 04:30 #36131
    Jeffrey Bonto
    Guest

    Can you give me an idea on how to capture the data coming from the SMDR? Thanks in advance.

  • Author
    Posts
Viewing 5 posts - 1 through 5 (of 5 total)
  • The forum ‘Telecom Design’ is closed to new topics and replies.