Generic selectors
Exact matches only
Search in title
Search in content
Post Type Selectors

VSWR Value in ZTE iBSC

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • #65252
    Anand Singh
    Guest

    Friends,
    Any friend can tell me what is the Minor & Major trigger value of VSWR alarm in latest ZTE iBSc.As i found out in ZTE document VSWR is in between 2.8 & 1.8 but that is not follow the Industry standared. pls tell me the practical value which can we set in live network of ZTE i bSC.

    #65253
    Rex
    Guest

    Hi Anand Singh,
    VSWR_WARNING=1.6
    VSWR_URGENT=1.9 OR 2.1
    Regards,
    Rex

    #65254
    Ajmal Aryanpoor
    Guest

    Dear Singh,

    As per GSM standard the VSWR value in feeder should be less then 1,5 in ZTE iBSC version 6.10 and upper we have two level of VSWR,
    Minor 1.5 or more.
    Major more than 2.2 which will bock the cell cell or DTRUs which main TX and RX are connected to mentioned CDU.

    #65255
    Mickey
    Guest

    Hey ZTE experts,

    Can you confirm if we can set minor below 1.5 as it is high for 1st level, Can we make it at 1.2??

    Also, Can any expert help me improving RxQuality in ZTEiBSC

Viewing 4 posts - 1 through 4 (of 4 total)
  • The forum ‘Telecom Design’ is closed to new topics and replies.