Generic selectors
Exact matches only
Search in title
Search in content

2 separate Cabinet with Same HSN

  • This topic has 1 reply, 1 voice, and was last updated 11 years ago by pix.
Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
  • #65207 Reply

    hi experts.
    i have two cabinet(Nokia Bts) in one Site.
    my conf is 8-4-8
    first 12 trx(sec 1 and sec 2)is in cabinet 1 and sec 3(last 8 trx) is in second cabinet.
    i use 3 different MA list for this site:

    MO for all sec=0
    MS for all sec=2
    HSN for all sec=31

    i dont have any common Freq in my MA LISTs.
    my site is under 2 BCF.
    BCF=1,8-4(cabinet 1)
    BCF=2,8(cabinet 2)

    i have no Sync Betwen 2 BCF(cabinet)
    each BCF gets its Clock independently.

    i have a lot of CDR in busy Hours.

    what is the problem?
    please correct me about my Config if it is wrong.

    #65208 Reply


    apart from bad CDR, is there anything else which is bad ? (tch assignments ? sdcch drops ?)
    i would suspect a feeder swap or trx swap : investigate this by performing a call setup in each sector, and onto different TRXs, to see if any trx shows poor setup success.

    of course, there are other possible reasons…


Viewing 2 posts - 1 through 2 (of 2 total)
Reply To: Reply #65208 in 2 separate Cabinet with Same HSN
Your information:

<a href="" title="" rel="" target=""> <blockquote cite=""> <code> <pre class=""> <em> <strong> <del datetime="" cite=""> <ins datetime="" cite=""> <ul> <ol start=""> <li> <img src="" border="" alt="" height="" width="">