Generic selectors
Exact matches only
Search in title
Search in content
Post Type Selectors

BBH

Viewing 5 posts - 1 through 5 (of 5 total)
  • Author
    Posts
  • #65101
    George
    Guest

    hi,

    What is the time period of frequency changing in BBH between TRXs?

    Is it possible to see the transmitting TRX during DT in BBH?

    Thanks in advance

    #65102
    George
    Guest

    sorry, I mean call changing not frequency.

    #65103
    pix
    Guest

    hi george,

    in alu system, for bbh, it is the frequency which is changing, not the call.

    the time period = the TDMA frame (4.615ms)

    durng drive test, the MAIO is related to the TRX : each TRX gets a unique MAIO so you can relate one with the other.

    regards
    pix

    #65104
    George
    Guest

    Hi Pix,

    But during DT I see only MAIO of BCCH TRX.

    Does TDMA frame (for change) belong to only ALU?

    System is Huawei

    #65105
    pix
    Guest

    ho yes, maio would work with sfh only.

    but if you are a MS in BBH, in huwaei, it means that every TDMA frame, the MS is changing TRX !
    Each TRX transmits a static frequency.
    So look at which frequency you are using for that TDMA frame, and you will know the TRX.

    The TDMA periodicity is standard (for every vendor)

    I doubt that you can see the frequency of each burst in your drive test. It is impossible !!
    There is a change every 4.615ms. What you see in the DT is a snapshot every 480ms… During 480ms, there are 110 changes of frequency.

    regards
    pix

Viewing 5 posts - 1 through 5 (of 5 total)
  • The forum ‘Telecom Design’ is closed to new topics and replies.