Generic selectors
Exact matches only
Search in title
Search in content
Post Type Selectors

BCCH lost problem

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • #36112
    jasminder singh
    Guest

    We are using BTS of AIRNET, and recently started fgacing a problem of BCCH lost, when we do channel verification on TEMS 3.2.5.

    And while drive testing on idle mode, the drive test tools shows “no service mode” and then suddenly the BCCH is lost and after 2-15 minutes, u get it back.

    Can anyone guide me as to what can be the other probable reason, other than it being a hardware problem.

    #36113
    Nguyen
    Guest

    Hi jasminder singh,

    I think this symptom cannot be investigated with some lines of description. You have to analysis deeply many radio parameters by mean of the layer 3 message in the TEMS log files. You can send me the TEMS log file via vndnguyen@hopthu.com, and I will try to figure out the problem.

    Brgds

    #36114
    Nguyen
    Guest

    I just found that one of the possible reason for this problem maybe the loss of mater clock synchronization. The master clock of the BTS may need to be calibrated.

Viewing 3 posts - 1 through 3 (of 3 total)
  • The forum ‘Telecom Design’ is closed to new topics and replies.