Generic selectors
Exact matches only
Search in title
Search in content
Post Type Selectors

hreqave, hreqt ??

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • #65055
    Red_Satan
    Guest

    Hi all,

    Can you explain for me two parameters hreqave and hreqt in GSM? and effect to networks when changing these parameter?

    Thanks alot

    #65056
    paraHO
    Guest

    Red_Satan have a read GSM0508?

    See sections: Measurement averaging process and BSS decision algorithm

    Hreqave and Hreqt:
    The values of Hreqt and Hreqave are defined by O&M for each cell for the averaging of reported measurements. The values of Hreqave and Hreqt can be different for each of the parameters being averaged.

    Hreqave:
    defines the period over which an average is produced, in terms of the number of SACCH blocks containing measurement results, i.e. the number of measurements contributing to each averaged measurement.

    Hreqt:
    is the number of averaged results that are maintained.
    The BSS shall support values of Hreqave and Hreqt such that
    0 < Hreqav < 32 and 0 < Hreqt < 32 where Hreqave * Hreqt < 32 Also, see: Table A.1: Parameters and thresholds stored for handover purposes Hreqave RXLEV, RXQUAL and MS_BTS Distance averaging periods defined in terms of number of SACCH multiframes. Range (1, 31); step size 1. Hreqt The number of averaged results that can be sent in a "handover required message" from BSS to MSC. Range (1, 31); step size 1.

Viewing 2 posts - 1 through 2 (of 2 total)
  • The forum ‘Telecom Design’ is closed to new topics and replies.