- This topic has 184 replies, 1 voice, and was last updated 13 years, 8 months ago by Nithish.
19th October 2005 at 08:52 #36042piyush kr. kishoreGuest
This is piyush working in ocb283, i’m not having any information regarding ocb283,is anyone will help me i willbe very grateful to him
regards19th October 2005 at 14:57 #36043MANOJGuest
Regarding the information for OCB-283 and EWSD:
1. For all those who are working in BSNL ALTTC ghaziabad conducts 6weeks to 8 weeks training for both. With a little bit of field experience the training will provide you confidence. Allthe manuals/handouts are provided there. if you have not attended the training contact any of your friend who hasattended the training and ask for manuals.
2. For those who are not working in BSNL the Documentation CD is the best way. Can be taken from ocb/ewsd incharge of your city. Ofcourse relation is required.
In the last GURU bina Shiksha nahi. You need a guru with you in field to become a guru. All these sources are just supporting ones.
regards to all4th November 2005 at 09:20 #36044bhavna sharmaGuest
sir i urgently need information about ocb-283 exchange.its sub sections like switching room mdf room,ivrs.
iwould be highly obliged if you send the required information on my id.8th November 2005 at 08:59 #36045Amar ManeGuest
I would like to know about the ZTE soft MSC working and documentation.I would thankful if any send it for me or tell me from where i can get it.My email id is28th November 2005 at 08:39 #36046VoGuest
Could anybody tell me how to read files in MOD(extracted from EWSD switch) by using windows XP or WinNT operating systems3rd December 2005 at 14:31 #36047PreetGuest
Can anyone please provide me with all the information about “OCB Exchange” from its basics,principle,working,its utility and other useful information.21st December 2005 at 09:07 #36048E1connected to EWSD probeGuest
I having problems to connect Siemmens EWSD Cp11 to Cisco gateway E1. How to do the settings to match the MFC/ R2 on the on the on the ESWD side to the E1 on the cisco 3660 side.4th January 2006 at 06:49 #36049Hari MulyadiGuest
I would like to connect siemens EWSD (IOPLAU) thru the X.25 link using Motorola router (Vanguard-340).
That will be use for sending MML Command to EWSD Switching.
But, I don’t know to make it.
It very good if anyone tell me how to do that or maybe another way to make it happens.
+62 542 70300739th January 2006 at 00:50 #36050anhtinGuest
I need some cards in stucture ocb283 of Alcatel1000 E10.
I am writting a report in stucture E10, I very need it.Thank very much. ( card ICID, ACMS…on SMM,SMC, …,in PICTURE’s card)
Anhtin12003@yahoo.com13th January 2006 at 13:18 #36051Prosper-Emmanuel PEYAGuest
Hi every one !
I’m looking a way to make a link between a E10B switch with a windows pleteform. Shouls i use a mediation device ? If so have you any solution that can work for ?18th January 2006 at 07:20 #36052odnooGuest
how are you. I need software manual and supply power please I help me ???24th January 2006 at 07:41 #36053SmanikkGuest
Could you ps give me som information on Traffic monitoring Tool or software for EWSD switch. It can be either online or offline.
Thanks25th January 2006 at 13:12 #36054varunGuest
i have to give my seminar on e-10b .what material should i pick?28th January 2006 at 18:17 #36055alket terziuGuest
what is MDF (main distribution frame). How it works1st February 2006 at 06:12 #36056harpreetGuest
i m doing training with airtel & want info abt ewsd for my project