Generic selectors
Exact matches only
Search in title
Search in content
Search in posts
Search in pages

SDCCH Mean Holding Time

  • This topic has 2 replies, 1 voice, and was last updated 10 years ago by DesertStorm.
Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • #64748 Reply
    DesertStorm
    Guest

    Hi all,

    SD MHT for a few cells in our network is high, upto 7 seconds. What should be the optimum value of SDCCH Mean holding time in a network? For cells with a high MHT, what are the possible measures we can take to reduce it?

    Thanks.

    #64749 Reply
    SHELDON
    Guest

    Hi Storm,

    In my opinion, the optimum value for SDCCH mean holding time should be around 4s. However, the actual value depends on several factors, including:
    1. Radio network features (eg, assignment to other cell)
    2. Abis Transmission method (satellite sites will have a far higher MHT than sites on microwave).
    3. TCH Congestion

    For those cells with the high MHT, check for faulty TRXs and TCH congestion. If the other KPIs are also bad, then it might be an indication of a faulty hardware.

    Also check to see the kinds of activities using SDCCHs in the cell. If you have many SMS and/or location updates in the cell, the MHT will be high.

    Regards,
    SHELDON

    #64750 Reply
    DesertStorm
    Guest

    Thanks!

Viewing 3 posts - 1 through 3 (of 3 total)
Reply To: SDCCH Mean Holding Time
Your information:




<a href="" title="" rel="" target=""> <blockquote cite=""> <code> <pre class=""> <em> <strong> <del datetime="" cite=""> <ins datetime="" cite=""> <ul> <ol start=""> <li> <img src="" border="" alt="" height="" width="">