- This topic has 3 replies, 1 voice, and was last updated 20 years, 4 months ago by Simon Bright.
15th January 2000 at 17:10 #32505BillGuest
We have 5 sites using ASPECT switchs, our average monthly call volume is 10 million calls, Our Abandoned rate is 1/2 a million call a month, we are not measuring any calls less than 2 seconds but We wanted to know why the calls are abandoning after 11 seconds (90% of these abandoned calls happen after 11 second hold time), I need the experts opinion on how to trace abandoned calls, We have InterQue in place by using 5 ASPECT ACDs and 3 ROLM PBXs. any help you may give on how to trace calls or a strategy I should be adopting in fire fight this problems, also If you can share the components that cause a Call to abandoned other than customer hang ups. Thank you all
Please note that our blocking ration .001%
Bill.5th February 2000 at 17:11 #32506Concourse GroupGuest
What call handling is provided during hold time–music, voice recording, keep-alive beeps, silence? If silence, you are lucky they hold for 11 s. Your abandon time is much shorter than I would expect for such a large call center, though you say nothing about what kind of call center you run. Comparative empirical abandon times are closer to 90 s for call centers of similar volume. They play music and recordings on hold.5th March 2000 at 17:11 #32507D.K.P.Guest
It depends on what type of business you run. What type of calls do you receive? In my business, I receive calls from people who are also running their business and often they have to hang up before we can answer their call because a customer pulls them away from the phone. Analyze your caller types to determine if the answer is similar to mine.10th April 2000 at 17:12 #32508Simon BrightGuest
Have you checked the occupancy times for all trunks. If you spot one that is a lot less than the average you could have a faulty trunk. Poor or one-way transmissions could cause abandons. So could false answers where the call is accepted and then immediately rejected due to channel state signalling faults.