Generic selectors
Exact matches only
Search in title
Search in content
Search in posts
Search in pages

Abis Idle Timeslot for EDGE – Huawei

Viewing 14 posts - 1 through 14 (of 14 total)
  • Author
    Posts
  • #64364 Reply
    Alexia
    Guest

    Hi Guys,
    How can i see the Abis idle timeslots for EDGE in huawei systems?
    Thank you.

    #64365 Reply
    Alexia
    Guest

    Any suggestion on this issue??

    #64366 Reply
    ucfff
    Guest

    Go to LMT and in MML Command type “LST IDLETS” hope it helps.

    #64367 Reply
    Fahd
    Guest

    Salam to all

    by using LMT
    1- right click on the site
    2- choice the config. Idle time slot
    3- then u will find How many idle timeslot config.

    #64368 Reply
    NJ
    Guest

    Hi Alexia,
    BSC 32 or BSC 6000?

    NJ

    #64369 Reply
    Nilo
    Guest

    hi Alexia
    in BSC32 go
    data auto config
    clik on the site
    clik on hardware
    the corespondant BIE appear with white color clik on it
    clik port TS
    you can see the idle TS

    #64370 Reply
    cufo
    Guest

    How many idle time slots for pdch are needed in one site with 3 cells?

    #64371 Reply
    ahmad
    Guest

    hi

    can any one support us with the formula used to calculate the IDLE TS in huwaie BSC 32 & 6000

    #64372 Reply
    RF Engg
    Guest

    How Many Idle time slot we have defined in Huawei system?

    #64373 Reply
    arcee
    Guest

    We require minimum 24 Idle TS in any cell with 3 sectors if we have defined 2 Static PDCH in each sector.

    2 Static PDCH * 3 sector =6 (64 K TS)

    6 (64K)= 24 (16k) Idle TS

    This is kept for providing min service to one subscriber given he only gets Static PDCH.

    #64374 Reply
    Agha
    Guest

    Hi Arcee
    Dummy Question in my mind. please correct me.
    In Huawei,TRAU frames(G-Abis Perf. indicator)just effects the KPI’s on PS or any effect on CS KPI’s. and how it increased(mainly due to any timer expired like T200).

    #64375 Reply
    VJ
    Guest

    Problem occurring in case of ring E1 configuration for cascading site. Call setup is not happening.

    #64376 Reply
    VJ
    Guest

    What is the calculation for Idle timeslot assigning in case cascading and ring e1 provided for same cell sites. system used huawei 2G.

    #64377 Reply
    dick
    Guest

    thx

Viewing 14 posts - 1 through 14 (of 14 total)
Reply To: Abis Idle Timeslot for EDGE – Huawei
Your information:




<a href="" title="" rel="" target=""> <blockquote cite=""> <code> <pre class=""> <em> <strong> <del datetime="" cite=""> <ins datetime="" cite=""> <ul> <ol start=""> <li> <img src="" border="" alt="" height="" width="">