Generic selectors
Exact matches only
Search in title
Search in content
Post Type Selectors

Power Control

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • #64326
    machine
    Guest

    Hellp peeps,
    I recently changed from 1*3 SFH to 1*1 SFH for some cells and i have observed slight degradation in radio conditions. Can i make some finetuning to PC inorder to improve this, can i tune both lower and upper quaality thresholds, or Average Window size, or Power reduction step size…pls advice

    #64327
    pix
    Guest

    hello,

    it would be good if you could post your current settings ! then we can help improve them…

    don’t forget to enable DTX as well.

    cheers
    pix

    #64328
    Mobile
    Guest

    Hi Machine ,

    Which Equipment do you use ??????
    I can help you dear

    Regards
    MObile

    #64329
    machine
    Guest

    It’s Alcatel equipment. I can’t seem to find the parameter, A_Lev_PC and other A_Qual_PC, the line reads null.
    Any idea how i can find the value of this parameter, What other parameter do you need besides
    MS_P_CON_ACK;3
    MS_P_CON_INIT;1
    OFFSET_HOPPING_PC;1
    MAX_POW_INC; 16dB
    MAX_POW_RED: 8dB
    POW INC FACT; 0.8
    POW RED FACT; 0.5
    POW RED STEP;6dB
    POW INC STEP;2dB

Viewing 4 posts - 1 through 4 (of 4 total)
  • The forum ‘Telecom Design’ is closed to new topics and replies.