Generic selectors
Exact matches only
Search in title
Search in content
Post Type Selectors

Low SDASR

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • #64313
    Kuttu
    Guest

    HiPix
    Vendor ALCATEL
    I dont have any SD cong. in my network. But SDASR in only 93%. As per NPO report it is showning SD assignment is failing on LU. But we have around 99% LUASR. Can anybody help?

    rs
    Kuttu

    #64314
    Param
    Guest

    HI

    Same problem with my network(Alcatel)
    Poor SDASR but Good LUSR.
    SD assign success for CM messages is 98%

    #64315
    Pix
    Guest

    Hi guys,

    Are you talking about these 2 indicators ?

    GSDNALUSUR SDCCH_assign_success_lu_rate
    GSDNASUR SDCCH_assign_success_rate

    The 2nd one takes into account all failures whatever the reason of SDCCH usage (NA, LU, SMS, DETACH, etc)

    Are you giving daily values, or busy hour values ? If daily, then it is normal to have a good LU success : during the night, the number of LU remains stable (periodic LU) and there is no congestion and clean frequencies.
    If there is a difference at busy hour, then it is weird.

    Now, it seems to me that you are comparing NSS indicators with BSS indicators. I can’t help you here : each system is computing indicators in its own way. Double check the formula and they way each NSS counter is triggered. You might be surprised…?

    Regards
    pix

    #64316
    kuttu
    Guest

    Hi Pix
    The indicators are same as you mentioned.

    SDCCH_assign_success_rate(GSDNASUR)(%)
    SDCCH_assign_success_lu_rate(GSDNALUSUR)(%)

    the fact is that
    SDCCH_assign_fail(GSDNAFLN) and SDCCH_assign_fail_lu(GSDNALUFLN)
    are almost equal.

Viewing 4 posts - 1 through 4 (of 4 total)
  • The forum ‘Telecom Design’ is closed to new topics and replies.