Generic selectors
Exact matches only
Search in title
Search in content
Post Type Selectors

BSC to MGW through Ater

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • #64251
    Brent
    Guest

    Hi,

    Is it possible to directly connect a GSM BSC to a MGW through Ater interface. Or does it necessarly needs the signal to be transcoded first to PCM ?

    Thanks.

    #64252
    pix
    Guest

    it depends if the MGW can perform all the functions of the TRAU or not (TFO negociation, Ater resources management, AMR codec adaptation, etc) (i guess there are more things)

    Basically, the TC is part of the BSS, and there are some proprietary improvements, I assume…

    regards
    pix

    #64253
    arsah
    Guest

    Hi,

    for directly connect a SIEMENS BSC to a NOKIA MGW, which functions must be done in both sides?

    regards
    arash

Viewing 3 posts - 1 through 3 (of 3 total)
  • The forum ‘Telecom Design’ is closed to new topics and replies.