Generic selectors
Exact matches only
Search in title
Search in content
Post Type Selectors

BA2(SACCH) table

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • #64173
    Rocker
    Guest

    BA2(SACCH) table
    Namely BA2 list, used to inform the MS in the active mode to search the BCCH
    frequencies of neighboring cells. BA list is sent through system information 5, 5bis,
    and 5ter.
    Note: During network optimization, all BCCH frequencies in the network
    can be put into the BA2 table so as to use the performance
    measuring function of the undefined neighboring cells in the traffic
    statistics console to find out the adjacent missing cells.
    It is recommended that the maximum frequencies should not
    exceed 15.

    It is extract from Huawei Docs, could someone explain the last sentence “It is recommended that the maximum frequencies should not
    exceed 15”

    #64174
    jack
    Guest

    i think it is for that reason:
    capacity of system information 5ter is not grater than 15 freq

    #64175
    mathias
    Guest

    Hi Experts, i was to know the maximum number of neighbour a 2G cell should be configured with.

    thanks

    #71206
    Abbas
    Guest

    It is extract from Huawei Docs, could someone explain the last sentence “It is recommended that the maximum frequencies should not
    exceed 15”

    its meaning that its better to set only 15 BCCH FD in BA2 list , to measure better and earlier

    LST GCELLHO2GBA2:IDTYPE=BYNAME,CELLNAME=”Cell”;

Viewing 4 posts - 1 through 4 (of 4 total)
  • The forum ‘Telecom Design’ is closed to new topics and replies.