Generic selectors
Exact matches only
Search in title
Search in content
Post Type Selectors

SDCCH drop after capacity increase

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • #64169
    mj
    Guest

    Hi all,
    in one of the siemens bts’s in our network after the capacity increase, the attempted sdcch siezures increased by 30% and sdcch drop increased from 0 to 15%. after a week we decreased the capacity of the same cell back to its old capacity. but still the high attempt and drop exists.
    please contribute.

    #64170
    lex
    Guest

    check for interference in the cell.

    #64171
    RAu
    Guest

    please check timeslot allocated for SDCCH…
    then u change with another timeslots…
    or u can swap SDCCH in another TRx

    #64172
    Mak
    Guest

    Check the Hardware. May some cables will be loose.

Viewing 4 posts - 1 through 4 (of 4 total)
  • The forum ‘Telecom Design’ is closed to new topics and replies.