Generic selectors
Exact matches only
Search in title
Search in content
Post Type Selectors

SDCCH Drop Due to other reason

Viewing 5 posts - 1 through 5 (of 5 total)
  • Author
    Posts
  • #64158
    Curious
    Guest

    Hi all
    SDCCH Drop Due to other reason has been increased in some sites which they are near to one military base (there is lots of antenna and radar equipment on this base),probably there is no external interference because the ICM band is ok,what do you think?have you faced same problem,it would be appreciated to share ur idea.

    #64159
    Prabhav
    Guest

    Pls. check any alarm in BTS. It is mainly due to mulfunction HW.

    #64160
    Curious
    Guest

    there in no alarm ,even we changed RBL of one of them ,it could not help.

    #64161
    Mania
    Guest

    Well check your hourly trend and conduct Spectrum analysis on UL and DL during the effected intervals.. compare it with a normal situation.Issue might be due to some link.. effecting DL only for that UL IOI stats dont show degradation.
    Or check for ABIS trace / Probe based analysis and check for SD_Failures

    #64162
    Sam
    Guest

    Change cable or connecter and see…Sometimes they are not shown as alarms.

Viewing 5 posts - 1 through 5 (of 5 total)
  • The forum ‘Telecom Design’ is closed to new topics and replies.