Generic selectors
Exact matches only
Search in title
Search in content
Post Type Selectors

Freq load factor V/W intersite distance

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • #64115
    utsav
    Guest

    Hi expert, can by any mean we can co-relate frequency load factor & suggested inter site distance.

    Pix : Can you please suggest something on issue.. Thanks in advance.

    #64116
    pix
    Guest

    hi,

    no, the intersite distance depends mostly on the traffic capacity you need (assuming coverage is not an issue in this area)

    then, when you get enough BTS to carry all the traffic, ensure the downtilt is high enough so that the BTS are not covering too far off their best serving area.

    regards
    pix

    #64117
    Mania
    Guest

    yup as Pix explained.
    Plan cells based on coverage and capacity in terms of subscribers.
    Allocate frequencies based on frequency band allocated trying to ensure maximum distance between reuse if doing mannually.
    Else the tools do it based on the coverage area / overlap between cells and the traffic of the cells.

Viewing 3 posts - 1 through 3 (of 3 total)
  • The forum ‘Telecom Design’ is closed to new topics and replies.