hi vikas
i am also working on zte system only. Are the channels defined on bcch or are distributed on both bcch and non bcch. Because we had the same problem of low throughput in our NW too. Also what the max no. Of time slots being given in each dsp.
if the pd channels are on different carriers its of no use as the user will get only one frequency at one time. Take one site only, balance the dsp overload if any, shift all the sd channels on non bcch, leave the default channels like fach on bcch and then test the throughput i am sure you will get results. We were earlier getting only 13kB At max but now have gone to 30kB with 2 static and 2 dynamic config.
Thanx Tanuj for ur response,i have given 1 static pd channel on bcch & 1 static on non-bcch trx,and i know 1 user get 1 freq. at a time but my configuration is like 2 static & all dynamic .
Even in data drive m getting 2UL+4DL TS in gud C/I with gud coverage m not getting consitent speed, for a instance m getting more than 240kbps ….also EDGE DL blocking is more than 8% .so how to improve all these?????
Author
Posts
Viewing 12 posts - 1 through 12 (of 12 total)
The forum ‘Telecom Design’ is closed to new topics and replies.