Generic selectors
Exact matches only
Search in title
Search in content
Post Type Selectors

Huawei BTS 3012AE

Viewing 5 posts - 1 through 5 (of 5 total)
  • Author
    Posts
  • #64029
    Jacubs
    Guest

    Hi dears,

    We have the following problem:
    We see DC Under Voltage Alarm, and the following actions & results were done:
    1. When we isolate the batteries the DC drops to 18 V and the site goes down.
    2. When we replace the PSUs and PMUs the problem remains.

    Can any one have such a problem before and guide me to the solution?

    Thanks

    Jacubs

    #64030
    NJ
    Guest

    Hi Jacubs,
    – When changing the PMU ensure the right setting of the DIP switch.
    – Check also, if you use M2000, the ressource of BTS (Site maintenance system-View ressources-DC voltage and AC voltage)
    – conform the installed PSUs and the configured PSUs (modify site card parameter-double click on DPMU board)

    Regards,
    NJ

    #64031
    Colin aduah
    Guest

    How much is Huawei BTS 3012?

    #64032
    kkhemara
    Guest

    i to know about discription BTS 3012 support.

    #64033
    asra
    Guest

    how many users a huawei bts 3012 support at a time?

Viewing 5 posts - 1 through 5 (of 5 total)
  • The forum ‘Telecom Design’ is closed to new topics and replies.