- This topic has 10 replies, 1 voice, and was last updated 10 years, 5 months ago by Mania.
23rd July 2010 at 18:27 #63744MickeyGuest
Can you explain about EnableMASelection… This is currently set as false in our ALU B10 network.What is this parameter abt & will it effect our KPI?28th July 2010 at 17:22 #63745MickeyGuest
Do you have some idea on this ?28th July 2010 at 18:37 #63746EnableMASelection to Pix???Guest
Can you explain about EnableMASelection… This is currently set as false in our ALU B10 network.What is this parameter abt & will it effect our KPI?28th July 2010 at 18:40 #63747pixGuest
sorry, i don’t know this parameter.
can you share the description of this parameter here ?
1/ what is the definition ?
2/ is it changeable ?
you can see this in the generic customer documenbtation in the OMCR.
pix28th July 2010 at 18:44 #63748MickeyGuest
This flag enables/disables channel selection according to Mobile
Coding rules 0: disabled, 1: enabled
Currently this is disabled29th July 2010 at 05:08 #63749pixGuest
I think this is a “hidden” parameter. If you activate frequency hopping then this parameter should be automatically set to True. You are seeing this parameter in the ACIE files, am I right ?
pix29th July 2010 at 09:57 #63750ManiaGuest
This parameter actually prioritizes allocation to TRX having longer MAL assigned to it. it is used where different MALs are used in the same Zone. to allocate calls to that band which has greater robustness to fading / interference.29th July 2010 at 12:55 #63751pixGuest
oh yeah, now i remember. By enabling this parameter, the TCH are allocated preferably on the timeslots were the MA list is the biggest.
Thanks mania 🙂29th July 2010 at 17:31 #63752MickeyGuest
I am Using 1*3 in a cluster with 6 TCH Per MAL with 2 TCH gap & 1*1 with 18 TCH in MAL in another cluster(Complete band is 900)
Now if i see my ACIE File this EN_MA_SELECTION= FALSE, Now tell me for which condition it would be favourable for me if i will enable this..29th July 2010 at 18:39 #63753pixGuest
enable it all the time, because i don’t see any reason why not to activate it.
the benefit is perhaps very subtle, i doubt if there is any impact on KPI, but it makes sense to enable it.
pix30th July 2010 at 05:45 #63754ManiaGuest
Should be enabled, even though I can’t fully understand your situation. This works for call assignment between TRXs of same band within the cell.
If your are using two different frequency plans in different clusters then this would not help,though having two TRXs with MAL1 and Two TRXs with a longer MAL-2 then enabling this parameter would prefer assignment to MAL2 TRXs.