Generic selectors
Exact matches only
Search in title
Search in content
Post Type Selectors

Low CSSR in Huawei Cell (unknow reason)

Viewing 15 posts - 16 through 30 (of 30 total)
  • Author
    Posts
  • #63510
    sandeep
    Guest

    Hi huawei man,

    are u working for alcatel managed service? which is handeling reliance huawei manged service?

    #63511
    HW
    Guest

    What is the value of RACH Min Access level ? TX integer ? RACH busy thrshold ?

    #63512
    Lucas
    Guest

    Sorry, it should be “Call Setup Indications(Call Type)/Channel Requests (Call Type)”

    #63513
    Huawei – Man
    Guest

    Hi HW

    RACH Min. Access Level (dbm): -106
    RACH busy Threshold: 16
    Tx-integer: 32

    #63514
    Huawei – Man
    Guest

    Hi Sandeep

    Sorry, I don’t understand your question.

    #63515
    HW
    Guest

    You have checked if this cell is overshoot from TA measurment ? also you have to check the UL DL unbalance (TRX Level)

    B.R

    #63516
    Huawei – Man
    Guest

    I have checked both.

    TA is not more (2-3 km)
    UL/DL Unbalance is around 6

    #63517
    subrat
    Guest

    Hi, I want to know the calculation of transit traffic in ericsson MSC. POI & inter MSC is also connected to that msc. also I want to calculate the traffic in same BSC connecteing to the MSC. Will anybody help.

    #63518
    nazir
    Guest

    call setup success rate

    #63519
    ieni
    Guest

    Hello,
    In the case of Call Setup Indications (SDCCH) (Circuit Service) and Call Setup Indications (TCH) (Circuit Service), where This counter provides the number of EST IND messages received by the BSC from the BTS when the MS access reason indicated in the EST IND message is not Packet Service and the type of the access channel assigned to the MS is SDCCH, respectively TCH, what are the scenarios when the access channel is SDCCH and when it is TCH?

    #63520
    DD
    Guest

    How can we solve low CSSR alarm for 3G in HW BTS?

    #63521
    LEMAURE
    Guest

    Dear Huawei Man!

    check out drops on signalling channels. they should be very important leading to the poor CSSR.
    if you’re in a rural area, reshape your LA boundary
    if it’s a urban area with balance LA loads then tilt the site to avoid multiple LU

    #63522
    Faheem Khan
    Guest

    Please some body Explain how we can minimize DCR(Call Drop Rate) and what are the reason behind High DCR.

    #63523
    ziad
    Guest

    thanks

    #72996
    Mahmoud almallah
    Guest

    How can fixed if i have call setup indication timed out SDCCH
    Increased

Viewing 15 posts - 16 through 30 (of 30 total)
  • The forum ‘Telecom Design’ is closed to new topics and replies.