Generic selectors
Exact matches only
Search in title
Search in content
Post Type Selectors

Inter BSC Issue

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • #63297
    54M
    Guest

    Dear,

    I have problem with Inter BSC Handover in Huawei Equiptment. Handover from A cell to B cell that located in different BSC (Same MSC) cannot be performed. check the counter and Trace A Interface the problem due to Handover Required reject – Protocol error between BSS and MSC.
    anyone know about this error message? and how to troubleshoot this problem?

    thanks

    #63298
    Pix
    Guest

    Hello 54M,

    You would probably need to check, in the MSC, the definitions of :
    1/ the adjacency relationship
    2/ the neighbour cell
    3/ the neighbour LAC

    If you felt like this have been done already, then do it again 🙂 All inter-BSC problems are due to a misconf in the MSC.

    regards
    pix

Viewing 2 posts - 1 through 2 (of 2 total)
  • The forum ‘Telecom Design’ is closed to new topics and replies.