Generic selectors
Exact matches only
Search in title
Search in content
Search in posts
Search in pages

How to detect crossed feeder

Viewing 7 posts - 1 through 7 (of 7 total)
  • Author
    Posts
  • #63261 Reply
    KASDIR
    Guest

    HELLO
    CAN ANY ONE TELL ME
    How to detect crossed feeder
    Best regards

    #63262 Reply
    varun
    Guest

    Hi Kasdir,

    If Tx cable is swapped with Rx antenna cable and Rx cable is swapped with Tx antenna cable so you will get poor Rx level in that sector.

    If antenna cables of two different sectors are swapped then you will get wrong BCCH or PN on that sector which u shud get.

    Ex:- If alpha cable is swapped with beta port or beta cable is swapped with alpha port then you will get alpha PN in beta direction and beta PN in alpha direction.

    usally we have 3 sector site(sector-1(alpha),Sector-2(Beta) and Sector-3(Gamma)

    Through drive test tool u can find out the cross feeder or sector swap.

    #63263 Reply
    KJB
    Guest

    Hi Kasdir,

    Varun is right.If DT is not possible then u need to visit site physically and Check Physical Feeder & Jumper connections

    BR.
    Kj

    #63264 Reply
    Mania
    Guest

    Hi,
    For intersector Cable swap i.e sector swap you can ID by HO attempts to neighbours in another sector would be stronger and if neighbours are defined as planned (not as implemented) the HSR might be a bit low for the two sectors.
    Also can confirm from DT Plot( would show coverage in wrong direction). For single cable swap there might be assignement failures on the cell and the TRX UL levels would be severely low as compared to DL levels. ( If you have a stat like UL Drops then it would be high) this would identify that UL path is swapped)- cannot be varified in field.
    For the DL path it can be varified in field. disable hopping and check for all TRXs the levels near site it might be a partial swap where only DCS is swapped or only the GSM is swapped.

    #63265 Reply
    ali
    Guest

    what is swap in GSM ?
    types of swaping ?
    what is partial and sector swaping ?
    please reply quickly.

    #63266 Reply
    Munashir
    Guest

    How can we check 2g partial swap(Gsm and Dcs swap) by Dt on Tems investigation???

    #73985 Reply
    Fmaj7
    Guest

    How many types of crossed feeder/swapped sector do we have ?
    anybody could tell me, many thanks

Viewing 7 posts - 1 through 7 (of 7 total)
Reply To: Reply #63263 in How to detect crossed feeder
Your information:




<a href="" title="" rel="" target=""> <blockquote cite=""> <code> <pre class=""> <em> <strong> <del datetime="" cite=""> <ins datetime="" cite=""> <ul> <ol start=""> <li> <img src="" border="" alt="" height="" width="">