Generic selectors
Exact matches only
Search in title
Search in content
Post Type Selectors

Silent calls

  • This topic has 5 replies, 1 voice, and was last updated 13 years, 9 months ago by Pedro Miguel Saraiva Santos.
Viewing 6 posts - 1 through 6 (of 6 total)
  • Author
    Posts
  • #63250
    Pedro Miguel Saraiva Santos
    Guest

    Dear All,
    Anyone knows anything about silent calls on mobile networks?The network is both GSM and UMTS.
    Many Thanks,
    Pedro Santos

    #63251
    jacky
    Guest

    Hi Pedro,
    The silent calls initiated by automatic calling equipment at the call center and terminated by the same equipment immediately after the called individual answers the phone.That happens because no live operator is available to take the set up call. Properly run call centres will strive to ensure that they do not generate more calls than their operators can handle.

    #63252
    joshi
    Guest

    Dear Pedro,
    Silent calls are generated by Mobile itself automatically when call originated by user is faild due to any reasons(RFloss,access fail etc.)This is also known as silent Re-Origination. In the RAN report, it can be seen as silent seizers.

    BR//

    #63253
    Tanuj
    Guest

    does mute call occur immediately or after sometime during the call

    #63254
    DaN
    Guest

    silent call may occur when CIC in ISUP-trunk not coincide at both nodes of one direction.
    ZB: 1-st timeslot in 1-st E1 at one side have CIC=1, at another – CIC=0.
    and physically voice (tx/rx) is switched at 2 different timeslots.

    #63255
    Pedro Miguel Saraiva Santos
    Guest

    Hi Tanuj.Both situations.After call setup (MOC and MTC) and during one call.

Viewing 6 posts - 1 through 6 (of 6 total)
  • The forum ‘Telecom Design’ is closed to new topics and replies.