Generic selectors
Exact matches only
Search in title
Search in content

inter-BSC handover problem

Viewing 5 posts - 1 through 5 (of 5 total)
  • Author
    Posts
  • #62779 Reply
    poncho
    Guest

    Hi,
    I have a problem with inter-BSC handover:
    1. The number of inter-BSC handover attempts have dropped together with the success rate
    2. Cell relations and MFs are correctly defined in the 2 neighbour BSCs.
    3. From drive tests, it is clear in LAYER 3 messages the mobile is not even receiving handover commands from cells in the other BSC
    4. intra-BSC handover is working fine.
    5. One funny observation in TEMS is that in the Measurement report sent by the MS, there is no list of neighbour cells but in the SI message type 5, the MS is sent a list of MFs on which to measure. (the mobile is restarted and it is the same; so I don’t believe it is an MS) problem.
    Still inter-BSC handovers are not happening but intra-BSC HO are happening.
    Any ideas? Thanks

    #62780 Reply
    KASDIR
    Guest

    HI
    poncho

    the problem maybe in synchronization
    check it
    best regards

    #62781 Reply
    poncho
    Guest

    Hi Kasdir,
    Can you slightly explain how the BSC synchronization can impact the inter-BSC handover? How can I check the status of BSC synchronization in E/// (that is if you are familiar with Ericsson). Thanks.

    Y.

    #62782 Reply
    koffi
    Guest

    for the handover problem, you can see in the cell description table if the BCCH of cell of BSC1 is define in the cell description table in the BSC 2

    #62783 Reply
    mohamed
    Guest

    how many type can be diveded handover?

Viewing 5 posts - 1 through 5 (of 5 total)
Reply To: Reply #62781 in inter-BSC handover problem
Your information:




<a href="" title="" rel="" target=""> <blockquote cite=""> <code> <pre class=""> <em> <strong> <del datetime="" cite=""> <ins datetime="" cite=""> <ul> <ol start=""> <li> <img src="" border="" alt="" height="" width="">